Use Tool Magic® on pliers tips to prevent scratching or marring your wire designs and workpieces. Simply dip the plier tips into the jar and stand them upright for 2–3 hours to dry. The smooth, soft coating on the tips won't damage your work. To remove the protective coating, simply peel it off. Tool Magic will not damage your pliers. Each jar contains 2 oz. of Tool Magic solution.

Want to know More?
• Provides heavy-duty rubber coating for pliers to enable wirework without marring sensitive or soft wire. Easy to apply - comes with directions.
• Simply dip tool, remove slowly, dry 2-3 hours or overnight.
• Please note that you will need to create a workspace before you open your jar. Tool Magic has a very strong odor. Make sure you are in a well ventilated area. You’ll need some newspaper to protect your tabletop and a place for your pliers to dry after they have been dipped. Keep them upright so that the coating doesn’t pool on the tips. A tool rack like the one below is idea.

• Before you use Tool Magic you need to stir it up so that it is not lumpy.
• You can make your own stirrer out of a few scraps of wire or buy a small whisk at your local grocer’s kitchen tool section.
• Just dip the tips of your pliers into the jar as far as you like but don’t dip the hinge. Slowly draw them out and hang them up for 2-4 hours.
• Once dried, the coating won't chip or crack. Tool Magic dries smooth and soft so your pliers will really grip without ever marring your wire again.
• Tool Magic is not permanent; once you've finished working with it just peel it off the tips! You'll get as many as 100 applications out of one 2 ounce jar. One bottle has about a 1 year shelf life.

• Note: This product must be sent by ground shipping - cannot be airmailed or Express Post if sent interstate.
• Safety Note: Product contains potentially harmful chemicals which should not be inhaled or applied to skin, eyes or clothing. Also inflammable so do not smoke while using product.
• 2fl oz - 100 applications.