Add to Cart
Our Price: $82.00
Product Code: CTS-1500
Sizes are: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8" and 1" diameter. Has a lever for ease of opening and closing.
How to use a disk cutter:
*Use a disk cutter on top of a rubber pad for support.
*Use a cutting lubricant, to lubricate the cutting edges of the punch.
*Use a suitable mallet, never a nail driving hammer.
*Always support the opposite side of the cutter with a sheet of the same diameter metal that you are cutting.
*This will help keep the upper and lower parts of the disk cutter in alignment and help minimize material sticking in the disk cutte ...
Read more
Sizes are: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8" and 1" diameter. Has a lever for ease of opening and closing.
How to use a disk cutter:
*Use a disk cutter on top of a rubber pad for support.
*Use a cutting lubricant, to lubricate the cutting edges of the punch.
*Use a suitable mallet, never a nail driving hammer.
*Always support the opposite side of the cutter with a sheet of the same diameter metal that you are cutting.
*This will help keep the upper and lower parts of the disk cutter in alignment and help minimize material sticking in the disk cutter.
*Do not exceed the maximum thickness recommended for your disk cutter.
*Only cut soft non-ferrous metals like brass, copper, silver and gold.
*Make sure your cutting edges are down.
*To prevent rust, keep your disk cutter lubricated between use and store in a dry location
Tell a friend about this product
Ask question about this product
Add to Cart